Best Motherboard for Ethereum Mining

Best Motherboard for Ethereum MiningTo efficiently mine bitcoin, ether, or any other cryptocurrency, you need a high-quality motherboard. Fortunately, most mining motherboards are relatively inexpensive. However, once the mining system starts using five or more video cards, you need to think about purchasing a reliable and high-quality motherboard so that it can work 24/7.

Most manufacturers these days support cryptocurrency mining. The design boards specifically to maximize hash rate. Compared to regular motherboards, mining boards have multiple PCIe slots that allow you to connect a large number of video cards. They also have specially modified BIOS configurations specifically for such boards with multiple video cards.

When choosing the best motherboard for a mining rig, you need to consider the number of connected video cards and the overall stability of the system.

Gaming motherboards are suitable for mining, however, they are often expensive and have a ton of unneeded features. On the other hand, specialized mining motherboards usually contain very few additional features, but are optimized for cryptocurrency mining.

To install graphics cards on a mining motherboard, you need PCI adapter cables.

Best Overall: ASUS B250 Mining Expert

  • Chipset: Intel B250
  • Socket: LGA 1151
  • Processor support: Intel Core i7 / i5 / i3 / Pentium / Celeron 7th and 6th generation
  • Memory support: 2 x DDR4, 2400 MHz, up to 32 GB
  • Ports: PCIe 1 × PCIe 3.0 x16 (processor), 18 PCIe x1
  • SATA / M.2: 4 × SATA 6Gb / s
  • Network: 1 × 1Gbps Intel LAN Chip
  • Sound: Realtek 8-channel ALC887
  • Rear panel connectors: 1 × LAN (RJ45), 1 × HDMI, 2 USB 2.0 ports, 4 USB 3.1 Gen1 ports, 3 audio connectors

Pros

  • Supports up to 19 video cards.
  • High reliability and stability.
  • Built-in mining mode.
  • Detects the status of the PCIe slot.

Cons

  • Requires a custom frame.
  • No M.2 NVMe slots.

ASUS B250 Mining Expert can be considered the best mining motherboard. The board supports up to 19 video cards has no real competitors in this aspect. B250 Mining Expert comes with a special mining mode that is built into the BIOS. This makes it easy to tune your graphics card for maximum mining efficiency.

This board boasts an exclusive triple ATX12V design for stable power delivery. There is a system for determining the state of the PCIe slot, which makes debugging as easy as possible. Despite these quirky features, the B250 Mining Expert can be considered a pretty basic board. Two slots allow you to install up to 32GB of DDR4 RAM. Up to four SATA3 drives and six USB devices can be connected at the same time.

Second Place: ASRock H110 Pro BTC +

  • Chipset: Intel H110
  • Socket: LGA 1151
  • Processor support: Intel Core / Pentium / Celeron 7th and 6th generation
  • Memory support: 2 x DDR4, 2400 MHz, up to 32 GB
  • PCIe ports: 1 × PCIe 3.0 x16 (processor), 12 PCIe 2.0 x1 slots
  • SATA / M.2: 4 × SATA 6Gb / s, 1 M.2 connector
  • Network: 1 × 1Gbps Intel LAN Chip
  • Sound: Realtek 7.1-channel ALC887
  • Rear panel connectors: 1 × LAN (RJ45), 1 DVI-D port, 4 USB 2.0 ports, 2 USB 3.1 Gen1 ports, 3 audio jacks

Pros

  • Supports up to 13 video cards.
  • Has an M.2 connector.
  • Built-in power and reset buttons.
  • Affordable price.

Cons

  • PCI-E slots are located very close to each other.
  • Supports Intel 7th and 6th generation processors only.

ASRock H110 Pro BTC + is an excellent motherboard for cryptocurrency mining for many reasons. Firstly, up to 13 video cards can be installed here, and the low price is also pleasing. Compared to other mining motherboards, this one has some useful features. These include three additional power connectors, one M.2 slot for NVMe SSD, built-in power and reset buttons, and next-generation digital PWM.

This board works seamlessly out of the box and is compatible with Windows and Linux operating systems. The H110 Pro BTC + also boasts a DVI-D port. This means that the onboard graphics of the processor can be used. The only drawback is the proximity of the PCI-E slots. Because of this, there may be problems with connecting a large number of video cards. Otherwise, this is a very affordable and reliable board.

Best Cell Arrangement: Biostar TB360-BTC D +

  • Chipset: Intel B360
  • Socket: LGA1151
  • Processor support: Intel Core i7 / i5 / i3 / Pentium / Celeron 9th and 8th generation
  • Memory support: 1 x DDR4, 2666 MHz, up to 16 GB
  • PCIe Ports: 8 × PCIe 3.0 x16
  • SATA / M.2: 1 × SATA 6Gb / s, 1 M.2 connector
  • Network: 1 × 1 Gbps Realtek LAN Chi
  • Sound: No
  • Rear panel connectors: 1 × LAN (RJ45), 1 HDMI, 4 USB 2.0 ports

Pros

  • Excellent PCB layout.
  • Supports 9th Gen Intel processors.
  • Has eight PCIe 3.0 x16 slots.
  • Easy installation.

Cons

  • Only one DDR4 slot.
  • No sound support.
  • No USB 3.0 ports.

Released in December 2020, Biostar TB360-BTC D + is one of the latest mining motherboards to support 9th and 8th Gen Intel Core processors. Compared to other mining boards, this one boasts a smart layout that allows multiple GPUs to be installed without using PCI riser cables. Biostar TB360-BTC D + comes with eight full-height PCIe 3.0 x16 slots, each spaced 50mm apart, giving ample room to mount multiple one or two slots wide graphics cards directly onto the motherboard.

Despite the great layout, TB360-BTC D + is a simple motherboard. It has only one DDR4 slot and one SATA3 connector. This board supports up to 16GB of system memory, which might be enough for mining, but overall it’s not much. TB360-BTC D + has no onboard audio and only four USB 2.0 ports. But there is an M.2 interface and an improved BIOS for mining, which allows you to quickly set up your computer and start mining.

Best value for money: ASUS Prime Z390-P

  • Chipset: Intel Z390
  • Socket: LGA 1151
  • Processor support: Intel Core / Pentium / Celeron 9th and 8th generation
  • Memory support: 4 x DDR4, 4266 MHz, up to 128 GB
  • PCIe Ports: 1 x PCIe 3.0 x16 (processor), 1 PCIe 3.0 x16 (x4), 4 PCIe 3.0 x1
  • SATA / M.2: 4 × SATA 6Gb / s, 2 × M.2 up to 2280 NVMe x4
  • Network: 1 × 1Gbps Realtek LAN Chip
  • Sound: Realtek 7.1-channel ALC887
  • Rear connectors: 1 × LAN (RJ45), 1 DisplayPort, 1 × HDMI, 2 USB 3.2 Gen2 ports, 2 USB 3.2 Gen1 ports, 3 x audio jacks

Pros

  • Great price.
  • Supports 9th Gen Intel processors.
  • Advanced PCB design.
  • Lots of hardware protections.

Cons

  • There are four SATA3 ports in total.

If you are not planning to mine Ethereum or Monero with more than six GPUs at the same time, then the ASUS Prime Z390-P is a good choice. Unlike many other mining boards, this one is well suited for other purposes like assembling a gaming computer or workstation. It supports 9th and 8th generation Intel processors.

ASUS Prime Z390-P boasts excellent build quality, custom-designed PCB, multiple hardware protections, dual M.2 and NVMe PCIe RAID, and improved power. The Z390-P has a comprehensive onboard fan and pump controls that can be controlled using ASUS Fan Xpert 4 utility or UEFI. This board is equipped with four USB 3.2 ports, which can be called a big plus. In general, this is a high-quality and inexpensive motherboard for both gaming and mining. Despite the small number of SATA3 ports, it offers many features.

Best Low Cost: ZOTAC B150 Mining ATX

  • Chipset: Intel B150
  • Socket: LGA 1151
  • Processor support: Intel Core / Pentium / Celeron 7th and 6th generation
  • Memory support: 2 x DDR4, 2400 MHz, up to 32 GB
  • PCIe ports: 1 × PCIe 3.0 x16 (processor), 7 PCIe 2.0 x1
  • SATA / M.2: 4 × SATA 6Gb / s
  • Network: 1 × 1Gbps LAN Chip
  • Sound: proprietary 5.1 channel sound
  • Rear panel connectors: 1 × LAN (RJ45), 1 × HDMI, 4 USB 3.0 ports, 3 audio jacks

Pros

  • Low price.
  • Supports 8 video cards.
  • Reliability and simplicity.

CONS

  • No VRM heatsinks.
  • 5.1 channel sound.

ZOTAC B150 Mining ATX is a very cheap motherboard. It is even cheaper than some entry-level mATX motherboards that only have one PCIe 3.0 x16 slot. ZOTAC B150 supports eight graphics cards, which is much more than other boards offer at a similar price.

The low cost means the lack of some standard features. It offers old 5.1 channel onboard audio and just four USB ports and no VRM heatsinks. However, when it comes to mining, it does a pretty good job and pays off quickly.

Best for Gaming & Mining: ASUS ROG Strix Z270E GAMING

  • Chipset: Intel Z270
  • Socket: LGA 1151
  • Processor support: Intel Core / Pentium / Celeron 7th and 6th generation
  • Memory support: 4 x DDR4, 3866 MHz (OC), up to 64 GB
  • PCIe ports: 2 PCIe 3.0 / 2.0 x16 (supports x16, x8 / x8), 1 PCIe 3.0 / 2.0 x16 (max at x4), 4 PCIe 3.0 / 2.0 x1
  • SATA / M.2: 6 x SATA 6Gb / s, 1 x M.2 – 21100 NVMe x4, 1 x M.2 up to 2280 NVMe x4
  • Network: 1 × 1.0 Gbps Intel LAN Chip, 1 Wi-Fi 802.11a / b / g / n / ac port
  • Sound: ROG SupremeFX 8CH S1220A HD Audio
  • Rear connectors: 2 × LAN (RJ45), 1 × HDMI, 1 DVI-D port, 1 DisplayPort, 4 USB 3.1 Gen1 ports, 2 USB 3.1 Gen2 Type-A + Type-C ports, 1 S / optical output PDIF, 5 audio connectors

Pros

  • Supports up to seven video cards.
  • Excellent PCB design and aesthetics.
  • Built-in Wi-Fi 802.11ac.
  • Easy to use BIOS.
  • Great for overclocking.

Cons

  • ASUS software with minor bugs.

Compared to the ZOTAC B150 Mining ATX motherboard, the ASUS ROG Strix Z270E GAMING is much more advanced. This board can support up to seven video cards for mining, and can also be used for games. In addition to its great looks, it has many possibilities. There are two M.2 slots for NVMe SSDs, built-in Wi-Fi, four DIMM slots, and multiple rear connectors.

ROG Strix Z270E GAMING has an extremely flexible and simple BIOS, so setting up multi-GPU configurations is a breeze. The board supports extreme overclocking thanks to efficient VRM heatsinks and high-quality capacitors, as well as RGB lighting that can be customized to your liking.

Conclusion

The choice of a suitable motherboard for mining largely depends on the number of video cards that will be installed on it. Beginners should start with a motherboard that has a minimum of six slots. The motherboards listed here stand out for their stability and reliability. Whichever option is chosen, it should give good results.

 

Leave a Reply

Your email address will not be published. Required fields are marked *